turned in my APP PLEASE GET ME ON THE PAGE

[Turbo V6 Camaro]

ok i turned in my 4th APP can i please get on the page :walking away with :( stoping every few steps and looking back: :confused:

graemlins/bowdown.gif

Miller Da Killer

graemlins/wavey.gif

[Dan M]

I got no app. Grr.

[95fbirdkid]

dan, i'm begining to question your html skills. but seeing as i have almost none, i'll keep my mouth shut ;)

[Dan M]

The form is written fine, it's the submission that is causing problems.

[Dan M]

Ok... I just sent in an app and it worked fine. What are you doing wrong? tongue.gif

[3.4 slow to go]

lemme try too

edit: Please give status on Bocefus ;) :D

[Turbo V6 Camaro]

what you mean it says thank you for subbmitting at the end :confused:

umm i'll try again........ call ginus i might have a record here graemlins/rofl.gif ;)

[Turbo V6 Camaro]

Thank you!

Thank you for your Application! If you feel you have entered an item incorrectly or did not include an email address, please email redlin@redlinevsix.com.


http://www.redlinevsix.com/Application/thankyou.htm

[Dan M]

I dunno viper, I'm not getting yours. I got Nates (and was quite amused). Bocefus will be admitted once he shows us all his invisible car.

[3.4 slow to go]

viper04af, just email me your info & I'll cut & aste & submit for you. remember, times running out for this offer.

[navyblue2000]

well, danny-ho, while we're on the topic of members and what not...
i really need mine changed...
Occupation should be level 1 tech analyst/tech support for the Kroger Co.
Mods should read: Fast Toys RA, Whisperlid/filter, 180* stat, 3" flowmaster exhaust, ZT LSD
1/4 mile should be 14.669 @ 93.76

tongue.gif

[Dan M]

Aye aye.
I hope I'll get on that soon... I ought to have some time tomorrow.

I wish I had a better chair here... this recliner doesn't cut it as a desk chair.

[ May 23, 2004, 11:57 PM: Message edited by: DrSquirts ]

[Camarolover98]

You were supposed to put me up a long time ago. I went to a meeting last year, and I'm still not on there.

[Nachius]

The membership page is currently under review and may be changed the way we add members.

Stay tuned for updates!

[Turbo V6 Camaro]

my ninfo

1 : Andrew Miller

2 : Viper04af

3 : Warren, OHIO

4 : viper03af@aol.com

5 : USAF

6 : Camaro

7 : 1997

8 : Yellow w/black stripes

9 : Manual

10 : Hardtop

11 : Motor
Diamond coated piston 8.5:1 c/r w/rings and wrist pins
Forged L32 2004 GTP Connecting Rods
ARP studs, bolts ect
Intense racing head gaskets
Comp Cams custom grind,
Comp cams Hydraulic Roller Lifters
Comp cams 130lb springs
Comp cams titanium retainers
Comp cams push rods
Cam install kit w/timing chain
Clevite 77® TriMetal™ Main Bearings
Clevite 77® TriMetal™ Rod Bearings
Clevite 77® TriMetal™ Cam Bearings
57 lb/hr injectors
Oil PSI kit to 80 PSI at WOT
Wester's computer programming. About done
New oil pump

Induction
Force Fed Fabs Turbo kit some parts coming in
Race port/polish heads w 3 angle valve job (See pics on page 2!)
LT1 MAF
K&N air filter

Exhaust
Pacesetter headers
2 1/2 cat back custom (will be upgraded to 3")
V8 80 series flow master 3" in dual 2 1/2" out with tips
Catco high flow cat

Ignition
MSD DIS 4
MSD Muti-Channle Boost Timing Control
MSD Custom Wires
MSD Blaster coils
MSD Coil Interface Modules

Gauges
A/F ratio
Boost
Fuel PSI

Outside
Light black outs all the way around
Viper yellow with black racing stripes
Mud/rubber flaps with "CAMARO" on them
"Camaro" rear inserts
3800 side stickers
30th Ann stickers
Summit fog lights

Inside
Will be custom painted Yellow by me
Seat covers black/yellow
White face/ reverse glow gauges
Neon’s (only 2, yellow)
Peddles
White face over lays for heat/headlights area
Black dash mat

System
Panasonic 60w * 4 w/ 3dot matrix display
Kenwood 1000w RMS amp
2 reference Infinity 12's
Kicker components
3 Farad CAP

Drive Train
Prothane Tranny mount
SFC ON HOLD
LCA ON HOLD
Torque Arm ON HOLD
Z28 Rear End/axles/brakes
1 piece Drive Shaft
STAGE-5 SPEC Clutch

Brakes
Hawk pads both front and rear.
Cross drilled/slotted rotors both front and rear.
Rear Disk Brake

I'm sure I forgot some things I’ll add if I did

12 : n/a

13 : viper03af

14 : NUMBER 6 ;)

[3.4 slow to go]

you need more info under the #11 topic. I don't see enough listed tongue.gif

[Turbo V6 Camaro]

Originally posted by 3.4 slow to go:
you need more info under the #11 topic. I don't see enough listed tongue.gif lol smile.gif

[Dan M]

Originally posted by 3.4 slow to go:
you need more info under the #11 topic. I don't see enough listed tongue.gif Yeah I don't think it's worth putting up until you get some mods done...

CamaroRob - Yeah you've been to at least 2 meetings now, so you're in... just not on the page yet.

As Shane said, the page is undergoing some changes. Him and I have been looking at an externally hosted database. We'll keep everyone posted, but the Member page as it is now will probably not exist for very long.

[jc Kyle]

i signed up to.. did u get mine?

[Dan M]

I don't think I did, Kyle. When did you submit it?

[jc Kyle]

late april, early may

[Dan M]

Somehow I think I remember seeing your name on one of the apps. You did not get a response?

[jc Kyle]

nope not one :(